Hard Hat Imprinting Guide

Bullhead Hard Hat Imprinting Guide

Custom logo imprinting

Artwork Guidelines

A vector based format is preferred. This includes .ai and .eps, or .pdf that includes editing capabilities. If a vector file can not be provided, a high resolution pixel based format (.eps, .tif, .psd, .jpeg, .png) is acceptable. Additional fees may apply to process logos.

Color Guidelines

Choose one to four colors from our stock offering located on page two. If your desired color/colors are not a stock color, please include the PMS (Pantone Matching System) color values with your logo for accuracy purposes.Keep in mind, this leaves room for minor variances in color.

Special colors add an additional cost. Please allow a 10 business day lead time per order after proof has been approved

Imprinting Areas

  • Cap and full brim hard hat styles: 3" x 2.25" (Front, back, or either side)
  • Climbing helmet style: 2.5" x 1.5" (Front, back, or either side)
  • Bump cap style: 1.5" x 1.5" (Front) - 3" x 1.5" (Back or either side)

Depending on the orientation of your logo it may not be able to fill the entire imprint area due to the curvature of the hard hat's surface. Our imprinting professional will configure your provided artwork on the hard hat to ensure optimal sizing and a proof will be provided for you.

Available hard hat/Bump Cap Colors:

Not all styles are available in all colors

Due to irregularities in color, Global Glove and Bullhead Safety will only allow colored imprints on white hard hats. Any other colored hard hat can receive a black or white imprint.

Available Hard Hat Bump Cap Colors

Full Brim Hard Hat
Front, Back and Sides Imprint Area:
3 inch W. x 2.25 inch H.

Full Brim Hard Hat

Cap Style Hard Hat
Front, Back and Sides Imprint Area:
3 inch W. x 2.25 inch H.

Cap Style Hard Hat

Climbing Style Hard Hat
Front, Back, and Sides Imprint Area:
2.5 inch W. x 1.5 inch H.

Climbing Helmet Side

Bump Cap
Back and Sides Imprint Area:
3 inch W. x 1.5 inch H.

Bump Cap Side

Front Imprint Area:
1.5 inch W. x 1.5 inch H.

Bump Cap Front

Please Note: Hard hats/bump caps are available in a variety of colors, to ensure your logo will be readable after print, it is best to choose a hard hat of a contrasting color or have your logo printed in a solid contrasting color such as black or white. When printing on a colored hard hat, the color of the hard hat may slightly alter the ink color. Although we check for errors, it is your responsibility to notify us of any changes prior to production. Check for spelling and spacing, as we are unable to accept any liability for errors and omissions once the proof has been approved. If any amendments or alterations are required, please indicate CLEARLY before approving the proof that will be provided. Custom printed products are non-returnable.